News.

Linz Donau Marathon Logo

Linz Oberbank Marathon
ACH team members are running at 16. Oberbank Linz Donau marathon

On April 09, 2017 the 16th Linz marathon took place. ACH employees participated with two marathon relay teams and 6 individual runners over the half marathon distance. With athletic enthusiasm all participants were finishing with good results.

After 21,1 km Harry Ohrfandl crossed  the finish line with awesome 1h30min followed by Mario Aitzetmüller with 1h38min. Rookie runner Stefan Pauzenberger finished after excellent 1h47min.

Placeholder Image

First International Conference LSR 2017
Advances in Liquid Silicon Rubber and related materials

More than 200 people followed the first international LSR 2017 conference in Anaheim, CAL. ACH head of sales Robert Köttner presented a paper on “Innovative tool technology - ServoShot® electric needle valve regulation and ACH 4.0”. The audience discussed future developments at the LSR market. In particular medical application had been of interest.

Chinaplas Logo

Chinaplas 2017 – May 15th – May 18th, 2017 Guangzhou China

At this year’s Chinaplas exhibition, ACH solution is participating at the booth of WittmannBattenfeld with a 2-K mold.

For the entire show a 8+8 thermoplast/LSR tool is in operation.

Logo Swiss Plastics 2017

Swiss Plastics 2017

Since several years Swiss Plastics Expo is well-established as an innovations fair for the plastics industry. Many markets have taken advantage from that such as medical-, electric &  electronics industry.

Applications with silicone rubber finding growing interest there. From 24th January – 26th January, 2017 you can experience a fully automated 2-K mold from ACH in operation..

Please visit us at Wittmann Battenfeld booth. We are looking forward to interessting discussions.

K-exhibition - the highlight for the rubber- and plastics industry

ACH solution again attends with an innovative tooling concept. Come and visit us at WittmannBattenfeld booth in hall 16/D22. We will demonstrate a new 8+8 fully automatic 2-K mold (thermoplast/LSR). We are looking forward to interesting talks. 

Chinaplas 2016 – Asia’s No.1 Rubber & Plastics Exhibition in Shanghai/China

Visit us at the Engel booth E3E01 during Chinaplas 2016 from 25.04.-28.04.2015 and get a demonstration of a fully automatic 2-K mold (thermoplast/LSR) from ACH. 

T-Plas Bangkok 2015

Visit us at the Engel booth during T-Plas 2015 in Bangkok/Thailand from 26.08.-29.08.2015 and  check out an operating, fully automatic 2-K mold (thermoplast/LSR) from ACH solution.

DIVE-IN EVENT 2015.

Even under the current hot temperatures the employees of ACH solution keep cool and thus staying on top of the customer projects to proceed with the expected perfection.

We at ACH are taken-up the plunge for our customers and working out challenging solutions for the implementation of new developments.

With team spirit all employees are working hand-in-hand for the success of the company and satisfied customers.

IRC 2015 – International Rubber Conference

Visit us at the Engel booth at this years IRC in Nuremberg from 29.06.-02.07.2015 und check out an operating, fully automatic 2-K mold (thermoplast/LSR) of ACH.

Elmia Polymer/Sweden – Top polymer event in Scandinavia

Visit us at the Engel booth during Elmia Polymer in Jonköping/Sweden from 21.04.-24.04.2015 and  check out an operating, fully automatic 2-K mold (thermoplast/LSR) of ACH.

23. FAKUMA - INTERNATIONAL EXHIBITION FOR PLASTICS TECHNOLOGY

14.10.-18.10.2014 at Friedrichshafen/Lake Bodensee, Germany
For ACH Solution, Fakuma is the most important event for the plastics- and rubber processing industry. At the booth of Engel in hall A5-5204 you can check-out an operating, fully automatic 2-K mold (thermoplast/LSR) of ACH.

PLASTEX/CZ – INTERNATIONAL EXHIBITION FOR PLASTICS, RUBBER AND COMPOSITES

Visit us at the Engel booth during PLASTEX exhibition in Brünn/CZ from 29.09.-03.10.2014 and have a check out an operating, fully automatic 2-K mold (thermoplast/LSR) of ACH.

SUPPLIER'S EXPO 

ACH Solution was invited to exhibit at 3M’s annual Supplier’s Expo on May 13th, 2014 at the Holiday Inn in Minneapolis, MN/USA. It was a good opportunity to have meetings with representatives of different R&D divisions from Medical, Personal Safety, Electric/Electronics etc.

ACH SOLUTION IN POLEN

The next exhibition where you can see a mold of ACH Solution in operation at the Engel booth (hall 3) is PLASTPOL/Kielce, Poland from 27th May - 30th May 2014.

ACH SOLUTION IN PORTUGAL

The next exhibition where you can see a mold of ACH solution in operation at the Engel booth is MOLDPLAS in Batahla/Portugal from 07th May - 10th May 2014.

AWARD FOR COMPETENCE IN ENVIRONMENTAL PROTECTION.

During the klima:aktiv conference on November 25th, 2013 in Vienna Austrians minister for environmental affairs Niki Berlakovich handed over the award of the Austrian Energy Agency for exceptionally energy efficient companies. With the installation of a air/air heat pump and a photovoltaic facility ACH-Solution has made a valuable contribution for environmental protection. At the same time it has increased the competitiveness to counteract the raising costs for energy utilizing a reasonable but innovative concept. The action is rounding up the total concept of ACH-Solution for environmental friendly operation in combination with the successful audit for environmental management system according to ISO 14001 for considerate and concious exploitation of natural ressources.

Find more details under http:/www.klimaaktiv.at/presse/eebetriebe2013.html.

Participation K-2013

Successful participation at K-2013 in Düsseldorf at the booth of Engel. Demonstration of a fully automatic 4+4 cavity 2-K thermoplast/LSR tool. Shot weight for the silicone gasket was only 0,04 gr each piece.

K-SHOW Düsseldorf

Are you interested to view a 2-K fully-electric adjustable needle valve gated system (Servo-Shot) in operation? Come and see us at K-Show in Düsseldorf from 16th through 23rd October - we are looking forward to meet you there!

Room for new ideas.

Ideas require space! That‘s why we have more space with our new production unit to develop such ideas and to ultimately implement it into innovations. Since we are not just only thinking of the future with our technology we are putting efforts on environmental sustainability with the building. The power supply for the vast majority of the required electricity is produced by on-site solar panels.